Kit for WP AER 35 fork.
Application:
- KTM SX 65 2017-2023
- Husqvarna TC 65 2017-2023
- GAS GAS MC 65 2021-2023
- KTM SX 50 2017-2023
- Husqvarna TC 50 2017-2023
- GAS GAS MC 50 2021-2023
TO INSTALL THE KIT IT’S NECESSARY THE SPECIFIC Wrench for Kit WP AER 35
The purpose of the kit is to obtain a closed cartridge fork. It’s installed a piston with shims that allow the use of different settings based on the rider and have sensitivity to the original adjusters which don’t work as stock.
With the kit it’s supplied a negative spring to make more comfortable the first part of the travel and a hydrostop to dampen the stroke end of the fork.
Optionally it is possible to use the nitrogen valve (INCLUDED) to install in the fork leg.
The final result is a suspension similar to a WP AER 48 of KTM and Husqvarna 250-450.
DESIGNED AND MADE BY LAINER SUSPENSION RACING.
SHIMS NOT INCLUDED
Suggested setting KTM SX 65, Husqvarna TC 65, GAS GAS MC 65
| REBOUND | COMPRESSION |
| Hole 8 mm | Hole 12 mm |
| PISTON | PISTON |
| 22X010 | 2X26X015 |
| 4X26X010 | 22X020 |
| 14X010 | 2X22X010 |
| 25X010 | 3X16X030 |
| 22X010 | 2X26X015 |
| 19X010 | |
| 16X010 | |
| 14X010 | |
| 12X010 | |
| 2X11X030 | |
| OIL LEVEL BOTH SIDES: MINIMUM 30 cc – MAXIMUM 60 cc | |
Suggested setting KTM SX 50, Husqvarna TC 50, GAS GAS MC 50
| REBOUND | COMPRESSION |
| Hole 8 mm | Hole 12 mm |
| PISTON | PISTON |
| 22X010 | 26X015 |
| 2X26X010 | 22X020 |
| 14X010 | 2X22X010 |
| 25X010 | 3X16X030 |
| 22X010 | 2X26X015 |
| 19X010 | |
| 16X010 | |
| 13X010 | |
| 11X010 | |
| 2X10X030 | |
| OIL LEVEL BOTH SIDE: MINIMUM 30 cc -MAXIMUM 60 cc | |
| IF THE SETTING IS TOO STIFF MAKE A HOLE 1,25 mm ON SIDE OF THE PISTON | |
